Sniffer 15.4 v2.0.1

　　IEEE 802.15.4 Packet Sniffer for Android devices.Please note that external hardware （i.e.， a USB Sniffer accessory/device） is required to actually capture frames. However， application features can be tried out using the test mode.Application features：* Capture 802.15.4 frames （by using a sniffer 15.4 accessory/device）.* Display captured frames.* Filtering （by frame type， source address， destination address， and payload）.* Store captured frames on phone memory for future display.* Export captured frames to PCAP format （Wireshark compatible）.* Live forwarding to an arbitrary IP address using the Zigbee Encapsulation Protocol （ZEP）.* Test mode （to try out application functionality without a sniffer 15.4 accessory/device）.To actually sniff packets you can use the following hardware：- A Tmote Sky （a.k.a TelosB） configured as a sniffer 15.4 device; or- A SEED-EYE board configured as a sniffer 15.4 accessoryIn general， the SEED-EYE board should work on every Android device （3.1+）， while the Tmote Sky works only on Android devices supporting the USB host mode （e.g.， the Samsung Galaxy Nexus）.Tested Devices：* Nexus S （Tmote sky *not* supported， you must use a SEED-EYE board） * Galaxy NexusMore info can be found at http://rtn.sssup.it/index.php/software/sniffer-154Application authors：- Daniele Alessandrelli- Andrea AzzaràPS： for reporting problems， bug， comments， etc， please send an e-mail to d.alessandrelli@sssup.it. Thanks！